§ Legal Notice
Hartmannstraße 125 · 127 · 129 · Erlangen

Temperature

27. November 2026
  • Open TV Room

    18:00 Uhr

Temperature

Live weather and environmental data measured right at HaWo: our dormitory’s own east/west sensors combined with the nearby OpenSenseMap station “Oppi” in Erlangen (adding barometric pressure and particulate matter), alongside all classic RRD long-term graphs.

Live Station Comparison Difference (HaWo vs. Oppi): -2.88 °C
Auto-refresh: 60 s
🏠 Dormitory Sensor

HaWo Dormitory Sensor

East & West Side · SHT31

Outdoor Temperature 0,77 °C ↓ -3,01 °C · ↑ 4,85 °C
Humidity 98,5 % ↓ 86,0 % · ↑ 99,3 %
📡 openSenseMap

OpenSenseMap "Oppi"

Erlangen · Outdoor Station (BME280 / SDS011)

openSenseMap ↗
Temperature 3,65 °C BME280
Humidity 100,0 % BME280
Pressure 978,8 hPa BME280
PM2.5 7,20 µg/m³ SDS011
PM10 17,85 µg/m³ SDS011

24-Hour Trend (OpenSenseMap „Oppi“)

Interactive live measurements including air pressure and particulate matter.

Loading 24h OpenSenseMap trend…

Classic HaWo Sensor Graphs (RRD)

Long-term archive of the dormitory sensors (24h up to 360 days).

24 Hours

Temperature in °C (24 Hours)
Temperature in °C · 24 Hours
Humidity in % (24 Hours)
Humidity in % · 24 Hours

Technology & Data Sources

HaWo Dormitory Sensor: We use two sensors because we could not find a single mounting spot guaranteed to remain unaffected by direct sunlight all year round. One pair of sensors (temperature + humidity) is mounted on the west side of the building, and one on the east side.

Since November 2018 we use solar-powered wireless SHT31 sensors. Schematics for the east-side sensor are available at https://gitlab.cs.fau.de/PoempelFox/hawotempdev2018/, while the west-side sensor is a slightly modified Foxtemp2016 device. SHT31 provides temperature accuracy of ±0.2 °C and humidity accuracy of ±2%.

OpenSenseMap Station “Oppi”: As an additional source, we integrate the public senseBox Oppi (63dd2ce24eb4af0008e4860d) in Erlangen, adding barometric pressure (BME280) and particulate matter PM2.5 / PM10 (SDS011). Both sources and display options can be configured in the WordPress Customizer under Appearance → Customize → HaWo Website-Konfiguration → Wetter & Sensoren.

Access on the command line / by script

A small daemon accumulates the East and West sensor readings:
telnet ente.hawo.net 7337 (temperature)
telnet ente.hawo.net 7338 (humidity)

Direct access to the sensors is currently unavailable due to our network migration. Of course, you can also use netcat or similar tools instead of telnet.

Previously used technology (documentation prior to 2013)

Until 2013, a dual DS1620 setup (Dallas/Maxim) connected to a Linux PC parallel port via RJ45 cabling was used, making HaWo likely the first student dormitory with IPv6-accessible temperature measurements (sponsored by Fox_Muld and Nico).